Oil and gas play · Gulf Coast Basin

Austin Chalk trend play

The fractured-chalk trend of south and central Texas, from Pearsall to Giddings. Vertical wells, hydraulic fracturing in the 1970s and horizontal wells from 1984 opened it; the Eagle Ford directly below charges it.

Last updated · Atlas version 0.29.0

A north-east to south-west band roughly parallel to the Texas coast, about 325 miles (523 km) long and 25 to 40 miles (40 to 64 km) wide. Giddings field, in Burleson and nearby counties, lies in its centre.

Overview

Play record

Location
Pearsall and Giddings fields and the band of production between them, south-central Texas

U.S. Geological Survey Scientific Investigations Report 2012-5159[1]

Undiscovered resources (USGS 2019, mean)

6.9 billion bbl oil and 41.5 Tcf gas in the Austin Chalk and the Tokio and Eutaw formations, technically recoverable[2]

Matrix

Porosity 3 to 8%, permeability below 0.01 millidarcy[3]

At Giddings

Austin about 570 ft thick with its top at 6,730 ft; Eagle Ford 300 ft thick below it[1]

Entry coverage

11 of 13 topics

Not yet sourced

Discovery, First production. These are added only when a public source supports them. How the Atlas is made

The story

  • Early wells were simple vertical holes that drained the fractures near them. In the 1970s operators began to fracture the chalk hydraulically, linking fractures into larger drainage areas.[1]
  • Horizontal drilling arrived in 1984, first at Pearsall and Giddings. A horizontal well crossing several fracture systems recovers three to five times as much as a comparable vertical well.[1]
  • At Giddings, Union Pacific Resources treated about 250 vertical and 150 horizontal wells with water fracs, which use large volumes of water and no proppant; the horizontal treatments alone added more than 5 million barrels of oil equivalent.[4]

Geology

Geological setting

Reported

Along the Lower Cretaceous shelf edge, which the main fractures run parallel to. Fault zones such as the Balcones, Luling and Mexia-Talco run in en-echelon belts parallel to the Austin outcrop.[1]

The trap

Published interpretation

Continuous where the chalk lies over mature Eagle Ford: the tight chalk holds oil and gas in its fractures without a structural trap, and at Giddings oil over gas suggests a continuous reservoir with no hydrocarbon-water contact. Updip, conventional pools sit against normal faults.[1, 2]

Reservoir rocks

Reported
  • Austin Chalk

    Late Cretaceous chalk and marl above the Eagle Ford. Its tight rock produces from natural fractures; horizontal wells were first drilled into it at Pearsall and Giddings in 1984.

Source rock

Published interpretation

The Eagle Ford directly below. Its oil and gas rose through fractures into the basal, fractured part of the chalk.[1, 2]

Seal

Published interpretation

The chalk's own very low matrix porosity and permeability; updip, normal faults.[1]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Mudstone and shale
  • Organic-rich mudstone (source rock)
  • Limestone and marl
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

Drilling

Where wells do best

Published interpretation
  • Sweet spots are where many fracture systems connect, often around normal faults and local structures. Tensile fractures downdip of salt structures make the most effective reservoirs.[1]
  • The lower and upper chalks hold more and larger fractures than the clay-rich middle marl.[1]
  • In horizontal wells, cuttings, penetration rate and gas show whether the lateral is in zone and crossing fractures; borehole images record the fractures directly.[3]

What to watch for

Published interpretation
  • Vertical fractures are parallel and widely spaced with few intersections, and they can stop at thin marl beds, so the reservoir is split into compartments.[1]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Austin Chalk trend play. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/fields/austin-chalk-trend/.

BibTeX
@misc{geomasteratlas_austin_chalk_trend,
  author = {{GeoMaster Atlas}},
  title = {Austin Chalk trend play},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/fields/austin-chalk-trend/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Austin Chalk trend play
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/fields/austin-chalk-trend/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)