Oil and gas field · Arabian Basin

Burgan field

The world's second largest oil field, in south-east Kuwait: three domes on the Kuwait Arch holding thick Cretaceous sands, found in 1938 and still the source of most of Kuwait's oil.

Last updated · Atlas version 0.29.0

About 40 km south of Kuwait City, around the town of Ahmadi. The Greater Burgan field takes in the Burgan, Magwa and Ahmadi domes.

Overview

Field record

Discovered
23 February 1938 (Burgan-1)
First production
June 1946 (first export)
Location
South-east Kuwait
Operator
Kuwait Oil Company

GEO ExPro[1]

Area

About 780 square kilometres[1]

Discovery well

Burgan-1 hit high-pressure Wara sand at 1,120 m and flowed 32° API oil at over 4,000 barrels a day[1]

Recoverable reserves

Published estimates of ultimate recovery range from about 39 to 87 billion barrels of oil equivalent[1, 2]

Production

1 million barrels a day by 1955[1]

Entry coverage

13 of 13 topics

The story

  • Geologists noted a gently dipping dome with bitumen seeps at Burgan as early as 1912. The Kuwait Oil Company, set up by Anglo-Persian and Gulf Oil, won the concession in 1934.[1]
  • Burgan-1 was spudded at a seep on 16 October 1936 and struck oil on 23 February 1938. Eight more wells drilled up to 1942 all produced, finding new pay in the Burgan Formation, before the war halted work.[1]
  • The first crude was shipped in June 1946. Oil was found on the Magwa dome in 1950 and the Ahmadi dome in 1952.[1]
  • In 1991 retreating Iraqi forces set fire to over 700 Kuwaiti wells, half of them at Burgan.[1]

Geology

Geological setting

Published interpretation

On the north-south Kuwait Arch, a basement horst reactivated in the Late Jurassic. The reservoirs were laid down in near-shore deltaic, littoral and lagoonal settings on a gently sinking shelf.[1, 2]

The trap

Published interpretation

Three gentle domes, Burgan, Magwa and Ahmadi, on a NNE-trending asymmetric anticline: the west flank dips under 2° and the east flank locally up to 10°. The domes are put down to movement of the Infracambrian Hormuz Salt, basement block faulting or both. Many small normal faults cross the field; they did little to form the trap but some divide the reservoirs.[1, 2]

Reservoir rocks

Reported
  • Burgan Formation

    A thick Albian sand of Kuwait, laid down by rivers and tide-influenced coasts. Its Third Sand has produced most of the oil of the Burgan field, the second largest in the world.

  • Zubair Formation

    Early Cretaceous river and delta sandstones with shales, one of the most important and prolific oil reservoirs of southern Iraq and the "Main Pay" of Rumaila.

Source rock

Published interpretation

Probably organic-rich Lower Cretaceous shales, with oil generated and moving in Miocene to Pliocene time. Youash (1989) points to a large area of mature source rock to the north-east.[1, 2]

Seal

Published interpretation

Shales between the sands, and the Ahmadi Shale on top of the Wara.[1, 2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Sandstone
  • Mudstone and shale
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

Drilling

Where wells do best

Published interpretation
  • The middle unit of the Third Sand, a quartz-rich, multi-darcy sand in the Burgan Formation, has produced over 75% of the oil.[1]
  • Over 1,500 ft of well-sorted, medium to coarse sand in the Wara, Burgan and Zubair formations.[2]

What to watch for

Published interpretation
  • Some of the many small faults compartmentalise the reservoirs, and more probably lie below seismic resolution.[1]

Open questions

Where sources disagree

Open question
  • Size of the structure. Youash (1989) gives the three domes together as 25 km wide and 65 km long; Sorkhabi (2012) gives the anticline as 35 by 20 km, with the field covering 780 square kilometres.[1, 2]

The Atlas shows each view with its source. How the Atlas is made

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Burgan field. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/fields/burgan/.

BibTeX
@misc{geomasteratlas_burgan,
  author = {{GeoMaster Atlas}},
  title = {Burgan field},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/fields/burgan/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Burgan field
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/fields/burgan/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)

Sources

Written in our own words from these sources. Checked 21 November 2026.

  1. 1Sorkhabi (2012), The Great Burgan field, Kuwait (5 August 2012). GEO ExPro.Cite
  2. 2Youash (1989), Greater Burgan of Kuwait: world's second largest oil field (abstract). AAPG Search and Discovery Article #91022, AAPG Annual Convention, San Antonio.Cite
  3. 3Strohmenger and others (2006), Sequence stratigraphy and reservoir architecture of the Burgan and Mauddud formations (Lower Cretaceous), Kuwait (abstract). AAPG Search and Discovery Article #90052, AAPG Annual Convention, Houston.Cite
  4. 4FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.Cite