Oil field · Central North Sea

Buzzard field

The largest UK oil discovery in the 25 years before 2020: stacked Upper Jurassic deep-sea sands sealed inside the Kimmeridge Clay source rock.

Blocks 19/5a, 19/10a, 20/1 and 20/6a, Outer Moray Firth.

Field record

Discovered
May 2001
Discovery well
20/06-3
First production
January 2007
Water depth
97 m
Original operator
EnCana
Operator
CNOOC International

North Sea Transition Authority open data[1]

Reservoir age

Late Kimmeridgian to Mid Volgian (Late Jurassic)[2]

Trap

Stratigraphic pinchout to the north, west and south[2]

Performance

52% more than the reserves estimated at the start of development[2]

The story

  • Production started in January 2007. Phase I finished in 2014 with 38 wells from 36 platform slots. Platform drilling resumed in 2018, and Phase II drilling started in 2019 from a new northern manifold.[1, 2]
  • Production surveillance showed that the appraisal depositional model was too simple. Re-describing the cores led to a new model of stacked channels building out over older sand lobes.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Organic-rich mudstone (source rock)
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

The sands thin out and pinch out into Kimmeridge Clay mudstone to the north, west and south. The same mudstone wraps around the sands, so it is both seal and source.[2, 3]

Reservoir rocks

  • Kimmeridge Clay Formation

    Dark, organic-rich Upper Jurassic mudstone: the source rock of the North Sea. Sand flows inside it form the reservoirs of Buzzard and Magnus, and the Burns Sandstone Member.

Where wells do best

  • Channel sands stacked over lobes explain why water sweeps the field unevenly. Well placement follows the channel architecture, not a layer-cake model.[2]

What to watch for

  • Uneven water sweep: complex sand body architecture lets water break through early in some areas.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence