Oil field · West of Shetland

Clair field

The largest oil accumulation on the UK shelf: 6 to 7 billion barrels in place in fractured Devonian red beds. Discovered in 1977, first oil 2005.

Blocks 206/7a, 206/8, 206/9a, 206/12a and 206/13a, about 75 km west of Shetland.

Field record

Discovered
July 1977
Discovery well
206/08-1A
First production
February 2005
Water depth
138 m
Original operator
BP

North Sea Transition Authority open data[1]

Oil in place

6 to 7 billion stock tank barrels[2]

Phases

Phase 1 from 2005; Clair Ridge from November 2018; Clair South in planning[2]

Key well

206/8-8 (1991) proved fractured Lower Clair Group red beds[2]

The story

  • Discovered in 1977, Clair took 28 years to reach production. Appraisal wells in the early 1990s showed fractures are what make it flow, and an extended test on 206/8-10Z proved longer-term performance.[2, 3]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Sandstone
  • Limestone and marl
  • Crystalline basement
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Oil in fractured Devonian to Carboniferous red beds of the Clair Group, laid down by rivers and lakes on land.[2, 4]

Reservoir rocks

  • Clair Group

    Devonian to Carboniferous red beds: the reservoir of Clair, the largest oil accumulation on the UK shelf. Fractures make it flow.

Where wells do best

  • Fractures are the main production mechanism, so wells are planned around the fracture and fault picture.[3]
  • Heavy-mineral analysis at the wellsite, in under two hours, tracks the stratigraphy ahead of LWD logs. It is used to pick casing and coring points, to keep or change the well trajectory, and to decide when to stop drilling: a geosteering tool in its own right.[4]

What to watch for

  • Upper Cretaceous mudstone is prone to wellbore instability; polygonal faults and tilted beds make it worse. Tophole wells keep a standoff from major faults.[3]
  • Formation tops are subtle and the rocks are almost barren of fossils; logging tools have failed and heavy minerals kept drilling going.[4]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence