Oil field · Northern North Sea

Dunlin field

A Brent Group field on a tilted fault block, the hub of a four-field cluster that produced over 500 million barrels before stopping in 2015.

Blocks 211/23a and 211/24a, East Shetland Basin, 160 km north-east of Shetland.

Field record

Status
Production ceased
Discovered
July 1973
Discovery well
211/23-1
First production
August 1978
Water depth
151 m
Original operator
Shell
Operator
Fairfield Energy

North Sea Transition Authority open data[1]

Reservoir depth

About 8,500 ft below sea level[2]

Reservoir quality

Porosity up to 30%; permeability 10 to 4,000 mD[2]

Cluster production

Over 500 million barrels (Dunlin and Dunlin SW 395)[3]

The story

  • Discovered in 1973 by well 211/23-1 (June in the 1991 memoir; NSTA records July). Production began in 1978 from the concrete gravity-base platform Dunlin Alpha, which later also handled Dunlin SW, Osprey and Merlin.[1, 2, 3]
  • Fairfield Energy bought the cluster in 2008 and invested to raise water injection. Production stopped on 15 June 2015.[3]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Limestone and marl
  • Sandstone
  • Organic-rich mudstone (source rock)
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A north-south tilted fault block on the western margin of the Viking Graben, sealed by Heather Formation shale.[2]

Reservoir rocks

  • Brent Group

    The Middle Jurassic delta sands that made the northern North Sea: the reservoir of Brent, Ninian, Thistle, Dunlin and Alwyn North.

Where wells do best

  • The Brent here is a 450 ft sequence of sands with minor shales, from a shoreface and delta system building north across the Viking Graben.[2]

What to watch for

No field-specific drilling hazards in the sources we checked. We add them as they are published.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1UKCS offshore hydrocarbon fields (WGS84): discovery date and well, first production, water depth, operators. North Sea Transition Authority Open Data.
  2. 2Baumann and O'Cathain (1991), The Dunlin Field, Blocks 211/23a and 211/24a, UK North Sea. Geological Society, London, Memoirs 14, 95 to 102.
  3. 3Ball and Gluyas (2020), The Dunlin, Dunlin SW, Osprey and Merlin fields, Blocks 211/23 and 211/24, UK North Sea. Geological Society, London, Memoirs 52, 814 to 827.
  4. 4FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.