Gas, condensate and oil play · Western Canada Sedimentary Basin

Duvernay play

The liquids-rich shale play of Alberta: the Duvernay source rock itself, drilled with horizontal multi-stage fractured wells since 2011, with Kaybob near Fox Creek as its core.

Central Alberta. Assessment areas: Kaybob in the north, Edson-Willesden Green in the centre, Innisfail in the south.

Play record

Location
Central Alberta: Fox Creek play (West Shale Basin) and Innisfail play (East Shale Basin)
Wells
Kaybob: 197 gas and 11 oil wells by the end of 2015

Alberta Energy Regulator[1]

In place (AGS estimate)

350 to 540 Tcf gas, 7 to 16 billion bbl NGLs, 44 to 81 billion bbl oil[1]

Proved plus probable reserves

395 million boe at 1 January 2016, 96% in Kaybob[1]

Kaybob organic carbon (P50)

4 wt%, porosity 8.5%[1]

The story

  • Development began in 2011 with horizontal multi-stage fracturing. Kaybob became the focus, with 130 new wells on production in 2014 and 2015.[1]
  • An early Kaybob South well (Celtic et al. HZ 15-33-60-20W5) tested 2.1 million cubic feet a day of gas with 75 barrels per million of 56° API condensate, at 63 MPa reservoir pressure.[2]
  • Condensate is 35% of production at Kaybob; oil is nearly 90% at Innisfail.[1]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Organic-rich mudstone (source rock)
  • Limestone and marl
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A continuous accumulation in an overpressured marine shale, laid down on the slopes and basin floor around the Leduc reefs.[1]

Reservoir rocks

  • Duvernay Formation

    Black, organic-rich Late Devonian shale and limestone laid down around the Leduc reefs. It sourced most of the oil and gas in Alberta's Upper Devonian reservoirs, and is now a liquids-rich shale play itself.

Where wells do best

  • Combining carbonate thickness, porosity, organic carbon and brittleness, the AER mapped the best prospectivity around the town of Fox Creek.[1]
  • Wells target the A and C shales. Maturity runs from immature in the east to dry gas in the west, so location decides the fluid.[1, 2]

What to watch for

  • Hydraulic fracturing in the Duvernay has induced earthquakes near Fox Creek and Red Deer. Operators there work under AER Subsurface Orders 2A and 7, with magnitude-based traffic-light rules.[3]
  • The B carbonate can stop fractures from growing where it is thick.[1]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence