Gas condensate field · Central North Sea

Elgin-Franklin field

The world's largest high-pressure, high-temperature development: Upper Jurassic shoreface sands at about 1,100 bar and 190°C.

Blocks 22/30b, 22/30c, 29/4d, 29/5b and 29/5c, about 240 km east of Aberdeen, UK Central Graben.

Field record

Discovered
Elgin March 1991; Franklin October 1986
Discovery well
Elgin 22/30c-8; Franklin 29/05b-4
First production
Elgin March 2001; Franklin September 2001
Water depth
92 m
Original operator
Elf
Operator
NEO NEXT+ Energy

North Sea Transition Authority open data[1]

Initial pressure

About 1,100 bar (16,000 psi)[2]

Temperature

About 190°C (375°F)[2]

Expected recovery

Around 1,300 million barrels of oil equivalent (886 produced by end 2017)[2]

The story

  • Franklin was discovered in the mid 1980s (1985 in the field memoir; NSTA records October 1986) and Elgin in 1991. Glenelg (1999) and West Franklin (2003) followed.[1, 2]
  • Gas and condensate production started in 2001 from six wells on each field. Satellite and infill wells extended the plateau.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Organic-rich mudstone (source rock)
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Elgin is a complex faulted anticline in four panels. Franklin, Glenelg and West Franklin are simpler tilted fault blocks.[2]

Reservoir rocks

  • Fulmar Formation

    Upper Jurassic shallow-marine sandstone. The main reservoir of the Elgin and Franklin high-pressure, high-temperature fields.

  • Pentland Formation

    Middle Jurassic coastal plain sands, muds and coals, with volcanic rocks in places. A secondary reservoir at Culzean and Franklin.

  • Skagerrak Formation

    Triassic river sandstones laid down on a hot, dry continent. A deep, high-pressure gas and condensate reservoir in Culzean and Franklin.

Where wells do best

  • The main reservoir is the Fulmar Formation shoreface sandstone. On Franklin, the Pentland and Skagerrak formations have also produced.[2]

What to watch for

  • Extreme pressure and temperature: about 1,100 bar and 190°C at the start. Development has needed continual new methods in geoscience, drilling, completion and operations.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence