Oil field · Central North Sea

Forties field

The field that made the UK North Sea. A Paleocene deep-sea fan sandstone holding about 4.6 billion barrels of oil in place, producing since 1975.

Blocks 21/10 and 22/6a, about 180 km east-north-east of Aberdeen.

Field record

Discovered
November 1970
Discovery well
21/10-1
First production
September 1975
Water depth
106 m
Original operator
BP
Operator
Apache Corporation

North Sea Transition Authority open data[1]

Oil in place

4,600 million stock tank barrels[2]

Recoverable

1,800 million stock tank barrels[2]

Peak rate

500,000 barrels of oil a day, reached in 1978[2]

The story

  • Well 21/10-1 found 119 m of oil-bearing Paleocene sands at 2,131 m below sea level in 1970. Five appraisal wells confirmed a major discovery reaching into Block 22/6.[1, 2]
  • Production started in September 1975, peaked at 500,000 barrels a day in 1978, and declined from 1981 to 77,000 barrels a day in 1999.[2]
  • Infill drilling began in September 1992, targeted with 3D seismic shot in 1988 and again in 1996. The newer survey imaged changes in lithology, fluids and saturation.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Tuff (volcanic ash)
  • Sandstone
  • Limestone and marl
  • Chalk
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Oil sits in the Forties Sandstone Member, capped by the mudstones of the Sele Formation.[2, 3]

Reservoir rocks

  • Forties Sandstone Member

    Late Paleocene deep-sea fan sandstone. One of the most prolific reservoirs in the UK, it holds the Forties and Nelson fields.

Where wells do best

  • Late in field life, the best infill targets came from repeat (4D) seismic showing where oil had not yet been swept.[2]
  • In the 1997 programme, high step-out, multilateral and horizontal wells did not deliver significantly better targets than earlier wells. The operator moved to lower-cost through-tubing rotary drilling.[2]

What to watch for

No field-specific drilling hazards in the sources we checked. We add them as they are published.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1UKCS offshore hydrocarbon fields (WGS84): discovery date and well, first production, water depth, operators. North Sea Transition Authority Open Data.
  2. 2Carter and Heale (2003), The Forties and Brimmond fields, Blocks 21/10, 22/6a, UK North Sea. Geological Society, London, Memoirs 20, 557 to 561.
  3. 3Forties Sandstone Member, BGS Lexicon of Named Rock Units (code FORS). British Geological Survey.
  4. 4Wills (1991), The Forties Field, Block 21/10, 22/6a, UK North Sea. Geological Society, London, Memoirs 14.
  5. 5FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.