Oil and gas field · Arabian Basin

Ghawar field

The largest oil field in the world: a north-trending anticline about 280 km long in eastern Saudi Arabia, found in 1948 and producing about 5 million barrels a day from the Jurassic Arab-D limestone, with large gas reserves in deeper Paleozoic rocks.

Last updated · Atlas version 0.29.0

About 200 km east of Riyadh and 100 km south-west of Dhahran, in the Eastern Province of Saudi Arabia.

Overview

Field record

Discovered
1948 (Ain Dar)
First production
1951
Location
Eastern Province, Saudi Arabia
Operator
Saudi Aramco

AAPG Search and Discovery Article #20026[1]

Size

About 280 km long and 26 to 30 km wide, over about 5,300 square kilometres; the productive area has been given as 2,800 square kilometres[1, 2]

Parts

Six culminations, from north to south Fazran, Ain Dar, Shedgum, Uthmaniyah, Haradh and Hawiyah[2]

Oil production

About 5 million barrels a day from the Arab-D, roughly constant from 1993 to 2003, under peripheral water injection since 1965[1]

Gas production

About 8 billion cubic feet a day, about 6 billion of it non-associated gas from Paleozoic reservoirs[1]

Reserves (USGS, 2003)

Known reserves about 115 billion barrels of oil, about 70 billion remaining[3]

Entry coverage

13 of 13 topics

The story

  • In 1940 a geologist noticed that a dry river bed near Haradh bent sharply to the south and proposed a buried north-south anticline. Mapping and shallow structure holes traced it, and it became known as the En Nala anticline.[2]
  • A test well at Ain Dar found oil in 1948. Haradh followed in 1949, Uthmaniyah in 1951, Shedgum in 1952 and Hawiyah in 1953, all in the same Upper Jurassic reservoir, and by 1953 they were recognised as one field. Fazran, the northernmost part, followed in 1957.[1, 2]
  • Gas was found in the Permian Khuff in 1971, then in the Unayzah and Jauf sandstones. A 1994 well on the east flank found sweet gas in Devonian sandstone, and Paleozoic exploration has since added 15 discoveries in and around the field.[1]

Geology

Geological setting

Published interpretation

On the Late Jurassic Arabian carbonate platform: the southern part of the structure lay in an intrashelf basin, the northern part on a platform to shoal. The Arab-D shoals upward in cycles from lime mudstone to ooid grainstone.[1]

The trap

Published interpretation

A drape anticline over a basement horst that first grew in the Carboniferous Hercynian deformation and moved again, above all in the Late Cretaceous. Several en echelon horst blocks lie beneath, with bounding faults of more than 3,000 ft throw at Silurian level that die out within the Triassic; few faults reach the Arab-D. Deep gas is also trapped against faults and unconformities on the east flank.[1]

Reservoir rocks

Reported
  • Arab Formation

    Upper Jurassic cycles of shoal carbonate and anhydrite. Its lowest cycle, the Arab-D, is the main reservoir of Ghawar, the largest oil field in the world, and holds most of the Jurassic oil of the Gulf.

  • Khuff Formation

    Late Permian to Early Triassic cycles of carbonate and anhydrite: a regional seal, and the largest reservoir of non-associated gas in the world, including the deep gas of Ghawar.

Source rock

Published interpretation

The oil came only from Jurassic organic-rich mudstones; the deep gas came from Silurian Qusaiba hot shale.[1]

Seal

Published interpretation

Massive anhydrite seals the Arab-D. Anhydrite and dolomite inside the Khuff and Triassic shale above it seal the gas.[1]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Limestone and marl
  • Dolomite
  • Salt and evaporites
  • Organic-rich mudstone (source rock)
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

Drilling

Where wells do best

Published interpretation
  • Units 2A and 2B of the Arab-D hold occasional very high permeability "super-k" zones tied to dolomite; wells crossing them have produced more than 500 barrels a day per foot.[2]
  • Reservoir quality improves upward through each shoaling cycle, from mudstone to grainstone.[1]
  • In the deep gas reservoirs, cross-bedded aeolian Unayzah sands and Jauf sands with illite grain coats keep the best porosity.[1]

What to watch for

Published interpretation
  • H2S in the Khuff gas exceeds 5% in a belt north of the centre of the field and in the far north-east.[1]
  • Predicting porosity is the main challenge for deep gas: Khuff diagenesis and quartz cement in the sandstones make reservoir quality vary widely.[1]
  • Water cut in the Arab-D rose from 26% in 1993 to 37% in 1999, then fell to 33% in 2003.[1]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Ghawar field. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/fields/ghawar/.

BibTeX
@misc{geomasteratlas_ghawar,
  author = {{GeoMaster Atlas}},
  title = {Ghawar field},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/fields/ghawar/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Ghawar field
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/fields/ghawar/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)