Oil field · Central North Sea

Golden Eagle field

Oil in two stacked sandstones, Upper Jurassic Burns and Lower Cretaceous Punt, trapped largely where the sands thin out. 18 km north of Buzzard.

Blocks 14/26a and 20/01, Outer Moray Firth.

Field record

Discovered
December 2006
Discovery well
20/01-6
First production
November 2014
Water depth
112 m
Original operator
Nexen
Operator
CNOOC International

North Sea Transition Authority open data[1]

Recoverable oil

About 140 million barrels[2]

Wells

19 in the first phase: 14 producers and 5 injectors[2]

Fields in the development

Golden Eagle, Peregrine and Solitaire; up to 90% of the oil is in Golden Eagle[2]

The story

  • Production started in October 2014 (NSTA records November 2014) and has exceeded expectations.[1, 2]
  • Lessons came from fibre-optic downhole monitoring, tracers between and within wells, interference tests, and dense ocean-bottom node seismic shot after start-up.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Organic-rich mudstone (source rock)
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Golden Eagle has a major element of stratigraphic pinchout. The satellites Peregrine and Solitaire are mainly structural closures.[2]

Reservoir rocks

  • Punt Sandstone Member

    Lower Cretaceous sandstone of the Moray Firth. The upper reservoir at Golden Eagle.

  • Burns Sandstone Member

    Upper Jurassic sandstone inside the Kimmeridge Clay, shed off active faults. A reservoir at Golden Eagle.

Where wells do best

  • Completions that control each reservoir zone separately have improved reservoir management and sweep.[2]

What to watch for

  • Pinchout traps depend on knowing where the sand ends. Depth conversion and seismic imaging were improved after start-up.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence