Oil field · Norwegian Viking Graben and Utsira High
Johan Sverdrup field
A giant found in 2010 in an area thought to be exhausted. About a third of Norway's oil output comes from it, from excellent Jurassic sand at only 1,900 m.
Utsira High, central North Sea, 65 km north-east of the Sleipner fields.
Field record
- Discovered
- 2010
- Discovery well
- 16/2-6
- First production
- 2019
- Water depth
- 115 m
- Operator
- Equinor
Norwegian Offshore Directorate FactPages[1]
Recoverable oil
402 million Sm³[2]
Recovery ambition
More than 70%[3]
Share of Norwegian oil
About one third[2]
The story
- The Utsira High had seen more than 40 years of disappointing drilling. The Edvard Grieg discovery in 2007 made Johan Sverdrup a high-probability prospect, and well 16/2-6 found it in 2010.[4]
- Phase 1 started in 2019 and Phase 2 in 2022, powered from shore. Water injection supports pressure and wells use gas lift.[2]
What a well drills through
The main rock layers above and in the reservoir, top down. Tap a layer for a summary.
- Mudstone and shale
- Sandstone
- Organic-rich mudstone (source rock)
- Coal
The trap
Upper Jurassic intra-Draupne sandstone on the Utsira High, with more oil in the Statfjord and Vestland groups, Viking Group spiculites and Zechstein carbonates.[2]
Reservoir rocks
- Draupne Formation
The Norwegian name for the Kimmeridge Clay north of the Mid North Sea High: the main oil source rock. At Johan Sverdrup, sand inside it is the main reservoir.
- Vestland Group
Middle to Late Jurassic delta and shallow-marine sands of the southern Viking Graben. Part of Johan Sverdrup's remaining oil is in it.
- Statfjord Formation
Latest Triassic to Early Jurassic sandstones laid down by rivers and fan deltas. The deeper of the two reservoirs at Brent and Alwyn North.
Where wells do best
What to watch for
- At the neighbouring Edvard Grieg discovery the potassium-rich reservoir sand looked like water-bearing shale on wireline logs; without core it could have been missed.[4]
GeoEngine Field Intelligence
This page, inside your geosteering project
Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.
See Field IntelligenceSources
Written in our own words from these sources. Checked 17 November 2026.
- 1Fields: discovery wellbore, operator and status. Norwegian Offshore Directorate FactPages (open data).
- 2Johan Sverdrup: field description (development, reservoir, recovery strategy, status) and recoverable reserves at 31 December 2025. Norwegian Offshore Directorate FactPages.
- 3Feder (2020), Recovering more than 70% from the Johan Sverdrup field (summary of OTC 30525). Journal of Petroleum Technology 72 (9), 62 to 63.
- 4Rønnevik, Jørstad and Lie (2017), The discovery process behind the giant Johan Sverdrup field. AAPG Memoir 113, Giant Fields of the Decade 2000 to 2010, 195 to 220.
- 5FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.