Oil field · Western Canada Sedimentary Basin

Leduc-Woodbend field

The field that started Alberta's modern oil industry: oil in a Devonian reef found by Imperial Leduc No. 1 in 1947, and a tight Nisku pool above it brought back by horizontal wells.

On the Leduc-Rimbey-Meadowbrook reef chain, central Alberta.

Field record

Discovered
13 February 1947
Discovery well
Imperial Leduc No. 1
Location
Leduc-Rimbey-Meadowbrook reef trend, central Alberta

Government of Alberta, Alberta Culture[1]

Reef height

About 200 m (an atoll of about 100 km² and a 1 km² pinnacle)[2]

Nisku pool, vertical wells

91.4 million barrels in 64 years[3]

Nisku pool, horizontal wells

17 million barrels in 12 years, with 41.5 to 51.9 million more expected[3]

The story

  • Imperial Leduc No. 1 blew in on 13 February 1947, after decades of fruitless searching, and set off the modern oil sector in Alberta. Imperial found a second major field near Redwater the next year.[1]
  • Horizontal drilling revived the tight Nisku pool; it is projected to produce until at least 2075 and earns more than $100 million a year.[3]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Dolomite
  • Limestone and marl
  • Mudstone and shale
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A Leduc reef built on the Cooking Lake platform, surrounded and buried by basin shales of the Duvernay and Ireton, with the Nisku carbonate shelf draped over it.[2, 4]

Reservoir rocks

  • Leduc Formation

    The Late Devonian reefs of Alberta. Oil found in them at Leduc in 1947 started the province's modern oil industry.

  • Nisku Formation

    A Late Devonian carbonate shelf over the Leduc reefs of central Alberta. At Leduc-Woodbend its tight dolomite has been revived by horizontal wells.

Where wells do best

  • In the Nisku, porosity is only 1 to 6% (mean 2.9%) but permeability reaches 0.1 to 100 millidarcies (mean 6.8): oil that vertical wells could not drain, but horizontal wells can.[3]

What to watch for

No field-specific drilling hazards in the sources we checked. We add them as they are published.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence