Oil field · Northern North Sea

Magnus field

The most northerly UK North Sea field when described in 1991: a Late Jurassic deep-sea fan wrapped in the Kimmeridge Clay source rock.

Blocks 211/7a and 211/12a, East Shetland Basin.

Field record

Discovered
June 1974
Discovery well
211/12-1
First production
August 1983
Water depth
190 m
Original operator
BP
Operator
EnQuest

North Sea Transition Authority open data[1]

Reservoir

Magnus Sandstone Member, Kimmeridgian to Early Volgian[2]

Trap

Fault block cut off at an unconformity, plus pinchout to north and south[3]

Biostratigraphy

Nine fossil events traced across 27 wells[2]

The story

  • Discovered in 1974 by well 211/12-1 and on production from 1983.[1]
  • A field-wide fossil framework, tied to 3D seismic, showed the fan grew in three phases and explained how its shales split the sand into pressure compartments.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Limestone and marl
  • Sandstone
  • Organic-rich mudstone (source rock)
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A combination trap: the reservoir is truncated by an unconformity at the crest of an easterly dipping fault block, and the sand-rich fan pinches out to the north and south.[3]

Reservoir rocks

  • Magnus Sandstone Member

    Upper Jurassic deep-sea fan sandstone inside the Kimmeridge Clay. The reservoir of the Magnus Field.

Where wells do best

  • Fossil picks at the wellsite are used in real time to place casing points and to calibrate the angle build above the reservoir in deviated wells.[2]

What to watch for

  • Sands with higher or lower pressure than expected (for example the "A Unit"): casing points are picked above them with wellsite biostratigraphy.[2]
  • Shales such as the "B Shale" and "F Unit" isolate sands, so pressure depletion differs between layers.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence