Gas, liquids and oil play · Western Canada Sedimentary Basin
Montney play
Thick Triassic siltstone over 130,000 km², drilled with horizontal wells and multi-stage fracturing since 2005. Gas in the deep south-west, more liquids and oil up-dip to the north-east.
North-east British Columbia and west-central Alberta, from the Rocky Mountain foothills to its eroded eastern edge.
Play record
- Location
- North-east British Columbia and west-central Alberta
Canada Energy Regulator (archived)[1]
Marketable gas (2013 estimate)
449 trillion cubic feet[1]
Marketable NGLs
14.5 billion barrels[1]
Marketable oil
1.1 billion barrels[1]
The story
- Explored since the 1950s for its conventional sandstone and dolostone reservoirs. The siltstone around them, far larger in volume, stayed undeveloped until 2005, when horizontal drilling and multi-stage fracturing made it pay.[1]
- In 2013 the federal, British Columbia and Alberta regulators made the first public estimate of its marketable resource; British Columbia holds 271 trillion cubic feet of the gas and Alberta 178.[1]
What a well drills through
The main rock layers above and in the reservoir, top down. Tap a layer for a summary.
- Mudstone and shale
- Sandstone
- Dolomite
The trap
A continuous accumulation in low-permeability siltstone, conventional in the east and a Deep Basin-style system to the west, where an under-pressured oil fairway gives way downdip to over-pressured liquids and gas.[1, 2]
Reservoir rocks
- Montney Formation
A thick Early Triassic siltstone across north-east British Columbia and west-central Alberta: assessed in 2013 at 449 trillion cubic feet of marketable gas, and opened by horizontal wells from 2005.
Where wells do best
- Pressure, temperature and gas composition split the play into a Northern (British Columbia) and a Southern (Alberta) domain; the C2+ wet gas index is a useful guide to liquids yield.[2]
What to watch for
- In the British Columbia foothills (Kobes area) wells meet deep, hard, abrasive, abnormally pressured rock, with unexpected fractures, lost circulation and coal seams. Managed-pressure drilling with lighter mud cut non-productive time from 100 hours to 8 on one well.[3]
GeoEngine Field Intelligence
This page, inside your geosteering project
Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.
See Field IntelligenceSources
Written in our own words from these sources. Checked 17 November 2026.
- 1National Energy Board, BC Oil and Gas Commission, Alberta Energy Regulator and BC Ministry of Natural Gas Development (2013), The ultimate potential for unconventional petroleum from the Montney Formation of British Columbia and Alberta (Energy Briefing Note). Canada Energy Regulator (archived).
- 2Gibbs and Rakhit (2019), Hydrodynamics, geothermics and spatial variations in hydrocarbon fluid distribution within the Montney Formation. SPE 196101, SPE Annual Technical Conference and Exhibition.
- 3Weatherhead and others (2015), MPD allows operator to safely and efficiently drill challenging wells in Kobes (Montney Formation), British Columbia. SPE 175890, SPE/CSUR Unconventional Resources Conference.
- 4Rokosh and others (2012), Summary of Alberta's shale- and siltstone-hosted hydrocarbon resource potential (Open File Report 2012-06). Energy Resources Conservation Board and Alberta Geological Survey.
- 5FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.