Oil field · Northern North Sea

Ninian field

A large Brent Group oil field on a tilted fault block in the East Shetland Basin. Its first horizontal well was geosteered using microscopic plant remains.

Blocks 3/3 and 3/8, East Shetland Basin, on the west side of the Viking Graben.

Field record

Operator
CNR International

North Sea Transition Authority open data[1]

Oil in place

2,920 million barrels, 35 to 40% recoverable[2]

Oil

36° API, paraffinic-naphthenic[2]

Peak rate

315,000 barrels a day, summer 1982[2]

The story

  • Production started in December 1978 from three fixed platforms with 109 drilling slots. By the end of 1988 more than 811 million barrels had been produced.[2]
  • The reservoir has almost no natural drive, so water injection was needed from the start.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Limestone and marl
  • Sandstone
  • Organic-rich mudstone (source rock)
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A westward tilted fault block with oil in marine and deltaic Brent Group sandstones.[2]

Reservoir rocks

  • Brent Group

    The Middle Jurassic delta sands that made the northern North Sea: the reservoir of Brent, Ninian, Thistle, Dunlin and Alwyn North.

Where wells do best

  • The lower Brent was thought to have no useful fossils. A new palynofacies method (microscopic organic remains) found fifteen events in core, and at the wellsite, with a geosteering tool, it kept the first horizontal well inside its target window.[3]

What to watch for

  • Part of the field lies in a structurally complex "degradation sheet", where the same method was later used to re-correlate wells.[3]
  • Negligible natural drive: pressure falls fast without water injection.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence