Oil and gas field · Norwegian Viking Graben and Utsira High

Oseberg field

Brent Group oil and gas in several structures, where massive gas injection up the flank built a large gas cap and pushed the oil efficiently.

Northern Norwegian North Sea.

Field record

Discovered
1979
Discovery well
30/6-1
First production
1988
Water depth
100 m
Operator
Equinor

Norwegian Offshore Directorate FactPages[1]

Recoverable oil

406 million Sm³ (plus 139 billion Sm³ gas)[2]

Reservoir depth

2,300 to 2,700 m[2]

First dedicated gas wells

2023[2]

The story

  • Discovered in 1979 and developed in phases from 1988: Oseberg A and B in the south, C in the north, then a gas phase with Oseberg D.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Limestone and marl
  • Sandstone
  • Organic-rich mudstone (source rock)
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Middle Jurassic Brent Group sand in several structures; satellites to the west also produce from the Statfjord Group and Cook Formation.[2]

Reservoir rocks

  • Brent Group

    The Middle Jurassic delta sands that made the northern North Sea: the reservoir of Brent, Ninian, Thistle, Dunlin and Alwyn North.

  • Tarbert Formation

    The T of BRENT: marine sandstone at the top of the Brent Group, laid down as the sea drowned the delta.

  • Ness Formation

    The N of BRENT: the delta top, where channel sands, lagoon muds and coals alternate. Hard to follow from well to well.

  • Etive Formation

    The E of BRENT: clean, massive beach and barrier sandstone, often the best rock in a Brent reservoir.

Where wells do best

  • The main reservoirs are the Oseberg and Tarbert formations, with production also from the Etive and Ness; quality is generally good.[2]

What to watch for

  • Gas blowdown has started in main parts of the field, so the gas cap grows and the oil zone thins.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1Fields: discovery wellbore, operator and status. Norwegian Offshore Directorate FactPages (open data).
  2. 2Oseberg: field description (development, reservoir, recovery strategy, status) and recoverable reserves at 31 December 2025. Norwegian Offshore Directorate FactPages.
  3. 3FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.