Oil field · West of Shetland

Schiehallion field

Paleocene deep-water channel sands, about 200 km west of Shetland. With neighbouring Loyal, more than 2.3 billion barrels in place.

Blocks 204/20, 204/25a, 204/25b, 205/16 and 205/21b, UK Atlantic Margin.

Field record

Discovered
October 1993
Discovery well
204/20-1
First production
July 1998
Water depth
375 m
Original operator
BP
Operator
BP

North Sea Transition Authority open data[1]

Oil in place (with Loyal)

More than 2.3 billion barrels[2]

Main reservoirs

Vaila Formation, T31 and T34 intervals[2]

Wells (2010)

46: 22 producers and 24 injectors[3]

The story

  • Schiehallion and Loyal were discovered in 1993 and 1994 and produced by waterflood from 1998 to 2013. After a long shut-in they restarted in 2017 through a new floating production vessel.[2]
  • A redevelopment drilling campaign from April 2015 had completed 21 wells by 2020, including the previously under-developed T28 to T25 fairway; a 4D survey was shot in 2018.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Sandstone
  • Limestone and marl
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Faulted, channelised Paleocene turbidite sands of the Vaila Formation.[2, 3]

Reservoir rocks

  • Vaila Formation

    Paleocene deep-water mudstones with thick turbidite sands: the reservoir of Schiehallion, Loyal, Laggan and Tormore.

Where wells do best

  • Repeat (4D) seismic, permanent downhole gauges, well tests and production logs found new compartments and infill targets that were drilled successfully.[3]

What to watch for

  • Compartments: wells were far less connected than planned, and the well count more than doubled from the original plan.[3]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence