Gas and oil field · Norwegian Viking Graben and Utsira High

Troll field

One of the largest offshore gas fields in the world, with a thin oil leg drained by long horizontal wells: more than two million reservoir metres drilled.

Horda Platform, northern Norwegian North Sea.

Field record

Discovered
1979
Discovery well
31/2-1
First production
1995
Water depth
300 to 330 m
Operator
Equinor

Norwegian Offshore Directorate FactPages[1]

Recoverable gas

1,474 billion Sm³[2]

Oil column

Troll Vest originally 22 to 26 m; now 1 to 5 m in the gas province[2]

Reservoir drilled

More than 2 million metres[2]

The story

  • Discovered in 1979 by well 31/2-1, the type well of the Sognefjord Formation. Gas from Troll Øst comes through the Troll A platform; Troll B and C produce the oil in Troll Vest.[2, 3]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Sandstone
  • Organic-rich mudstone (source rock)
  • Limestone and marl
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Three large rotated fault blocks; the eastern one is Troll Øst. Gas and oil sit in Late Jurassic shallow-marine Sognefjord sand, partly in the Fensfjord below.[2]

Reservoir rocks

  • Sognefjord Formation

    Late Jurassic coastal and shallow-marine sand: the main reservoir of Troll, one of the largest offshore gas fields in the world.

  • Fensfjord Formation

    Middle Jurassic coastal and shallow-marine sand below the Sognefjord. Part of the Troll reservoir.

Where wells do best

  • Long horizontal wells run through the thin oil zone just above the oil-water contact.[2]
  • The Sognefjord on Troll West has fifteen reservoir zones within three composite sequences; brackish facies in the east were found with detailed palynology.[4]

What to watch for

  • The oil column is very thin and shrinking as the gas cap and water expand: a few metres of vertical error puts a well in gas or water.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence