Oil field · Permian Basin
Yates field
A shallow giant on the crest of the Central Basin Platform. Caves and fractures in San Andres dolomite let early wells flow at up to 200,000 barrels a day.
Southern end of the Central Basin Platform, west Texas.
Field record
- Discovered
- 1926
- Location
- Pecos County, Texas
- Depth to top of reservoir
- 1,500 ft
Bureau of Economic Geology Permian Basin play portfolio (reservoir tables to 2000)[1]
Oil in place
4,000 million barrels[1]
Produced to 2000
1,381 million barrels[1]
Early well rates
Many above 10,000 and up to 200,000 barrels a day[1]
The story
- Discovered in 1926 and produced by primary depletion until 1976, when the field was unitized and gas was injected to hold pressure and use gas-cap gravity drainage.[1]
- Waterflooding started on the western flank in 1979, a polymer flood followed from 1983 to 1986, and CO2 was injected from late 1985 to 1991.[1]
- From late 1992 a fieldwide co-production project pumped out water and inflated the gas cap, letting oil bypassed by water drain again.[1]
What a well drills through
The main rock layers above and in the reservoir, top down. Tap a layer for a summary.
- Salt and evaporites
- Sandstone
- Dolomite
- Limestone and marl
The trap
San Andres dolomite on the structural crest of the Central Basin Platform, sealed by the evaporite-dominated Seven Rivers Formation. Grayburg, Queen and lower Seven Rivers sands also hold oil.[1]
Reservoir rocks
- San Andres Formation
The Permian Basin's most productive reservoir rock: shallow-sea dolomite stacked in upward-shallowing cycles capped by anhydrite. It holds the giant Wasson, Slaughter, Levelland and Yates fields.
- Seven Rivers Formation
Late Guadalupian evaporite-dominated rock on the Permian Basin platforms. It seals the giant Yates field, and its lower sands hold oil there too.
Where wells do best
- The shelf-crest facies in the centre and east of the field produce best. Dolomite averages 15% porosity and 100 millidarcies; fractures and solution-widened joints pass 1 darcy.[1]
What to watch for
- Open caves: early wells had bit drops into caverns formed when the San Andres was exposed and dissolved.[1]
GeoEngine Field Intelligence
This page, inside your geosteering project
Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.
See Field IntelligenceSources
Written in our own words from these sources. Checked 17 November 2026.
- 1Dutton and others (2004), Play analysis and digital portfolio of major oil reservoirs in the Permian Basin, final report: play descriptions, and reservoir tables with discovery year, county, depth to top and cumulative production to 2000 (Texas Railroad Commission and New Mexico data). Bureau of Economic Geology, The University of Texas at Austin, final report to the U.S. Department of Energy.
- 2FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.