Gas field · Southern North Sea

Barque field

Very tight, deeply buried dune sands in the Sole Pit area, made productive by natural fractures, hydraulic fracturing and horizontal wells.

Blocks 48/13a and 48/14, Sole Pit area.

Field record

Discovered
May 1983
Discovery well
48/13a-4
First production
September 1990
Water depth
81 m
Original operator
Shell
Operator
Shell plc

North Sea Transition Authority open data[1]

Source

Carboniferous Coal Measures below[2]

Seal

Zechstein evaporites above[2]

Deepest burial

Early Late Cretaceous, before two phases of inversion[2]

The story

  • A selected first area was developed together with the neighbouring Clipper Field, with first gas in October 1990 (memoir).[2]
  • Good results from horizontal wells led to development of the whole field.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Salt and evaporites
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Leman Sandstone between Coal Measures source below and Zechstein evaporite seal above, in a structure shaped by Late Cretaceous and mid-Tertiary inversion.[2]

Reservoir rocks

  • Leman Sandstone Formation

    Permian desert dune sandstone: the gas reservoir of the Southern North Sea, from Leman and Indefatigable to West Sole and Ravenspurn.

Where wells do best

  • Effective natural fracture zones and hydraulic fracturing make the tight sand flow. Horizontal wells performed well.[2]

What to watch for

  • Deep burial in the Sole Pit Trough crushed and cemented the sand: without fractures, parts of the field would not produce.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1UKCS offshore hydrocarbon fields (WGS84): discovery date and well, first production, water depth, operators. North Sea Transition Authority Open Data.
  2. 2Sarginson (2003), The Barque Field, Blocks 48/13a, 48/14, UK North Sea. Geological Society, London, Memoirs 20, 663 to 670.
  3. 3FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.