Basin · UK North Sea

Southern North Sea

The main UK gas basin, south of the Central North Sea. Gas from buried Carboniferous coals rose into Permian desert dune sands and was trapped beneath Zechstein salt.

How the basin was built

5 chapters, oldest first. Each one left the rocks that wells meet today.

  1. 1 · Carboniferous

    Coal swamps: the gas kitchen

    Coal measures of mudstone, sandstone and coal seams built up in the Westphalian. Buried deep, their coals made the gas found in the fields above.[1, 2, 3]

    Read more →
  2. 2 · Early Permian

    Desert dunes and a salt lake

    Wind piled up dune sands (Leman Sandstone) on the edge of a desert. Further north, rivers drained into the Silverpit playa lake, where red mud and salt settled.[4, 5, 6]

    Read more →
  3. 3 · Late Permian

    The Zechstein sea leaves the seal

    A shallow sea flooded the desert and dried out again and again, leaving carbonates and thick evaporites. The evaporites form an excellent seal over the Leman Sandstone.[3, 7]

    Read more →
  4. 4 · Triassic

    Red mud and river sand

    Red mudstones and sandstones of the Bacton Group followed. On the basin margin at Hewett these Bunter sands hold gas too.[8, 9]

    Read more →
  5. 5 · Cretaceous to Tertiary

    Deep burial, then squeezing

    Burial was deepest in the early Late Cretaceous, which damaged the sands most. Two later phases of inversion pushed the basin back up, folding traps and opening fractures that help the gas flow.[2, 3]

    Read more →

The rock column

Youngest at the top. Tap any layer for a summary, or open its page. Ages follow the international time chart[11].

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Salt and evaporites
  • Dolomite
  • Coal
Not to scale. Layers with a white edge sit inside the unit listed just above them. Not every layer is present everywhere in the basin. Rock patterns follow the USGS FGDC lithology standard.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1Conybeare Group, BGS Lexicon of Named Rock Units (code CNYB). British Geological Survey.
  2. 2Winter and King (1991), The West Sole Field, Block 48/6, UK North Sea. Geological Society, London, Memoirs 14, 517 to 523.
  3. 3Sarginson (2003), The Barque Field, Blocks 48/13a, 48/14, UK North Sea. Geological Society, London, Memoirs 20, 663 to 670.
  4. 4Leman Sandstone Formation, BGS Lexicon of Named Rock Units (code LMS). British Geological Survey.
  5. 5Silverpit Formation, BGS Lexicon of Named Rock Units (code SLVP). British Geological Survey.
  6. 6Turner, Jones, Prosser, Williams and Searl (1993), Structural and sedimentological controls on diagenesis in the Ravenspurn North gas reservoir. Petroleum Geology Conference series 4, 771 to 785.
  7. 7Zechstein Group, BGS Lexicon of Named Rock Units (code ZG). British Geological Survey.
  8. 8Bacton Group, BGS Lexicon of Named Rock Units (code BACT). British Geological Survey.
  9. 9Hook (2020), The Hewett Field, Blocks 48/28a, 48/29a, 48/30a, 52/4a and 52/5a, UK North Sea. Geological Society, London, Memoirs 52, 189 to 202.
  10. 10UKCS offshore hydrocarbon fields (WGS84): discovery date and well, first production, water depth, operators. North Sea Transition Authority Open Data.
  11. 11International Chronostratigraphic Chart, version 2024/12. International Commission on Stratigraphy.
  12. 12FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.