Gas field · Southern North Sea

Hewett field

A basin-margin gas field that produced from Triassic and Zechstein reservoirs instead of the usual Leman Sandstone, about 3.5 trillion cubic feet over 50 years.

Blocks 48/28a, 48/29a, 48/30a, 52/4a and 52/5a, on the Dowsing Fault Zone at the edge of the basin.

Field record

Status
Production ceased
Discovered
October 1966
Discovery well
48/29-1
First production
July 1969
Water depth
38 m
Original operator
Phillips
Operator
Eni UK

North Sea Transition Authority open data[1]

Gas recovered

About 3.5 trillion cubic feet, plus 0.9 from six satellites[2]

Peak

1976[2]

Wells

35, from three wellhead platforms[2]

The story

  • Gas went onshore to Bacton, where the sour gas was also processed. The 2020 memoir expected the field to stop producing in 2020; the regulator now lists it as production ceased.[1, 2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Salt and evaporites
  • Dolomite
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Structures on the basin margin bounded by the Dowsing Fault Zone, which shaped the structure, the deposits and the migration of gas.[2]

Reservoir rocks

  • Bunter Sandstone Formation

    Early Triassic red sandstone. At Hewett it held sour gas, the only sour reservoir in that field.

  • Bunter Shale Formation

    Red Early Triassic mudstones over the Zechstein. Its basal beds include the Hewett Sandstone, a gas reservoir at Hewett.

  • Zechsteinkalk Formation

    The first limestone and dolomite of the Zechstein sea. A gas reservoir at Hewett.

Where wells do best

  • Main reservoirs: the Hewett Sandstone (Lower Bunter), the Bunter Sandstone (Upper Bunter) and the Zechsteinkalk. Minor gas came from the Plattendolomit and the Leman Sandstone.[2]

What to watch for

  • Sour gas (hydrogen sulphide) in the Bunter Sandstone only.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1UKCS offshore hydrocarbon fields (WGS84): discovery date and well, first production, water depth, operators. North Sea Transition Authority Open Data.
  2. 2Hook (2020), The Hewett Field, Blocks 48/28a, 48/29a, 48/30a, 52/4a and 52/5a, UK North Sea. Geological Society, London, Memoirs 52, 189 to 202.
  3. 3FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.