Gas field · Southern North Sea

Ravenspurn North field

Gas near the northern edge of the Leman Sandstone, where dunes give way to flood and salt-flat deposits and some wells need fracturing to flow.

Blocks 42/30 and 43/26a, Southern North Sea.

Field record

Discovered
April 1983
Discovery well
42/30-2
First production
October 1990
Water depth
48 m
Original operator
Hamilton
Operator
Perenco

North Sea Transition Authority open data[1]

Reservoir thickness

About 300 ft of Lower Leman Sandstone in six climate cycles[2]

Development plan approved

1988[3]

First gas

July 1990 (memoir); NSTA records October 1990[1, 3]

The story

  • The 1991 memoir dates the discovery to October 1984; the regulator records well 42/30-2 in April 1983. Four years of appraisal led to development approval in 1988.[1, 3]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Salt and evaporites
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A combined structural and stratigraphic trap, closed by oblique strike-slip and normal faults sealed by Silverpit mudstones and Zechstein evaporites.[3]

Reservoir rocks

  • Leman Sandstone Formation

    Permian desert dune sandstone: the gas reservoir of the Southern North Sea, from Leman and Indefatigable to West Sole and Ravenspurn.

Where wells do best

  • Dune sands, dominant in the south-east, are the best reservoir. A high-deliverability area flows without stimulation.[2, 3]
  • The north-east B structure filled with gas early and escaped later illite cement; the south-west A structure was filled after illite had damaged the reservoir.[2]

What to watch for

  • The reservoir worsens to the north-west (thinner, flood and salt-flat facies, more clay). Wells there need hydraulic fracturing to flow commercially.[3]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence