Gas field · Southern North Sea

West Sole field

The first commercial discovery on the UK Continental Shelf: gas in tight dune sands that flow mainly through fractures.

Block 48/6, Sole Pit area of the Southern North Sea Permian Basin.

Field record

Discovered
December 1965
Discovery well
48/06-1
First production
March 1967
Water depth
26 m
Original operator
BP
Operator
Perenco

North Sea Transition Authority open data[1]

Initial reserves

1.873 trillion cubic feet (1.335 produced by end 1989)[2]

Dune sand permeability

Averages 3 mD, because of illite cement[2]

Source rock

Westphalian Coal Measures, directly below[2]

The story

  • Discovered in 1965 and producing from 1967.[1, 2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Sandstone
  • Salt and evaporites
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A faulted inversion anticline trending north-west to south-east, amplified when the basin was squeezed during the Alpine inversion.[2]

Reservoir rocks

  • Leman Sandstone Formation

    Permian desert dune sandstone: the gas reservoir of the Southern North Sea, from Leman and Indefatigable to West Sole and Ravenspurn.

Where wells do best

  • Open, gas-filled fractures from the Alpine inversion boost productivity in the south of the field. Dune units up to 40 m thick are the main reservoir.[2]

What to watch for

  • Fractures are not everywhere: whole segments are unfractured, and sealing faults made of crushed rock from Jurassic rifting split the field into compartments.[3]
  • Open fractures and conductive faults help rates but cause drilling difficulties and can bring early water.[3]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1UKCS offshore hydrocarbon fields (WGS84): discovery date and well, first production, water depth, operators. North Sea Transition Authority Open Data.
  2. 2Winter and King (1991), The West Sole Field, Block 48/6, UK North Sea. Geological Society, London, Memoirs 14, 517 to 523.
  3. 3Barr (2007), Conductive faults and sealing fractures in the West Sole gas fields, southern North Sea. Geological Society, London, Special Publications 292, 431 to 451.
  4. 4FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.