Gas play · Gulf Coast Basin

Haynesville Shale play

A deep, highly overpressured shale-gas play on the Texas and Louisiana border, opened by horizontal wells in 2007 and 2008. The shale is called the Haynesville in Louisiana and the Lower Bossier in east Texas.

Last updated · Atlas version 0.29.0

About 3.5 million acres in north-west Louisiana and east Texas, across more than 16 counties and parishes around the Sabine uplift.

Overview

Play record

Discovered
March 2008 (announced)
Discovery well
Chesapeake Energy's first horizontal well, Caddo Parish, June 2007
Location
From Harrison County, Texas, to Sabine and Natchitoches parishes, Louisiana
Wells
35 producing horizontal wells by early December 2008

AAPG Search and Discovery Article 90090, AAPG Annual Convention[1]

Undiscovered resources (USGS 2016, mean)

195.8 Tcf gas and 1.1 billion bbl conventional oil in the Haynesville Formation, technically recoverable[2]

Reservoir

200 to 300 ft thick, 9,000 to 14,000 ft deep, porosity 8 to 12%, water saturation 20 to 30%[3]

Pressure gradient

Up to 0.90 psi per foot[1]

Wells

First rates up to 30 MMcf a day from laterals of 3,000 to 5,000 ft; reserves up to 7.5 bcf per well[3]

Entry coverage

11 of 13 topics

Not yet sourced

First production, Seal. These are added only when a public source supports them. How the Atlas is made

The story

  • Operators had long seen strong gas shows in the Haynesville, and some vertical wells had produced small volumes. The play took off only once horizontal drilling and hydraulic fracturing were applied.[1]
  • Chesapeake Energy drilled the first horizontal well in Caddo Parish in June 2007 and announced the discovery in March 2008 after several confirmation wells. By early December 2008, 35 horizontal wells were producing and about 70 more were being drilled.[1]
  • On 15 December 2009 the Railroad Commission of Texas merged the Haynesville and Bossier field discoveries in east Texas into the Carthage (Haynesville Shale) field.[4]

Geology

Geological setting

Published interpretation

Laid down as the Gulf of Mexico opened. Basement structures and salt movement shaped where carbonate and sand were laid down, and carbonate shelves ringed the basin to the north and west.[3]

The trap

Published interpretation

A continuous gas accumulation in overpressured, organic-rich mudstone of the greater Sabine uplift area, limited to the south by the shelf break.[2, 3]

Reservoir rocks

Reported
  • Haynesville Formation

    Late Jurassic black, carbonate-rich mud from a deep, oxygen-poor basin around the Sabine uplift. It is both the source and the reservoir of the Haynesville shale-gas play, where very high overpressure gives strong first rates and steep declines.

Source rock

Reported

Its own mudstone, with the Smackover below: both source the Haynesville's conventional and continuous gas.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Organic-rich mudstone (source rock)
  • Limestone and marl
  • Sandstone
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

Drilling

Where wells do best

Published interpretation
  • The core is where restricted circulation around the Sabine uplift let organic-rich mud build up and survive. In the peripheral rock around it the USGS expects about half the gas per well.[2]
  • High matrix permeability for a shale and pressure gradients up to 0.90 psi per foot give very high first rates.[1]

What to watch for

Published interpretation
  • Pressure gradients reach 0.90 psi per foot.[1]
  • Wells decline about 80% in their first year, faster than in other shale-gas plays, which is put down to the very high overpressure.[3]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Haynesville Shale play. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/fields/haynesville-shale/.

BibTeX
@misc{geomasteratlas_haynesville_shale,
  author = {{GeoMaster Atlas}},
  title = {Haynesville Shale play},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/fields/haynesville-shale/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Haynesville Shale play
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/fields/haynesville-shale/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)