Formation · Jurassic

Haynesville Formation

Late Jurassic black, carbonate-rich mud from a deep, oxygen-poor basin around the Sabine uplift. It is both the source and the reservoir of the Haynesville shale-gas play, where very high overpressure gives strong first rates and steep declines.

Last updated · Atlas version 0.29.0

  • Source rock
  • Reservoir

Overview

AgeKimmeridgian to Tithonian, 154.8 to 143.1 million years ago[1, 2]
RankFormation[2]
Other namesIn east Texas the producing shale is usually called the Lower Bossier, which matches the Haynesville of Louisiana, so Haynesville and Bossier Shale are used for the same interval. The Texas regulator merged the Haynesville and Bossier field discoveries there into the Carthage (Haynesville Shale) field on 15 December 2009.[3]
ThicknessThe gas reservoir is 200 to 300 ft (70 to 100 m) thick.[2]
WhereMore than 16 counties and parishes along the border of east Texas and west Louisiana, about 3.5 million acres from Harrison County, Texas, to Sabine and Natchitoches parishes, Louisiana. The gas reservoir lies 9,000 to 14,000 ft (3,000 to 4,700 m) deep. Equivalent rocks run along the Gulf Coast from south Texas to the Florida Panhandle.[2, 4, 5]

Entry coverage

14 of 20 topics

Not yet sourced

Group and members, Type or reference section, Mineralogy, Grain size, sorting and sedimentary structures, Seal quality, Log response and published petrophysics. These are added only when a public source supports them. How the Atlas is made

Rocks and composition

Lithology

Reported

Organic- and carbonate-rich mudrock in the basin, passing into shallow-marine limestone (the Haynesville lime, Gilmer Limestone and Cotton Valley lime) on the shelves around it, and into sandstone in the eastern Gulf.[2, 5]

How it was laid down

Depositional environment

Published interpretation
  • Deep, quiet sea. Far from land and below the waves, only fine mud and plankton settle. If the bottom water has little oxygen, organic matter is preserved.[2, 5]
  • Carbonate ramp and shelf. A warm, shallow sea with little sand or mud, where shells, pellets and ooids build limestone and dolomite, deepening to basin muds.[2, 5]

Facies

Published interpretation

A range of mudrocks: bioturbated calcareous mudstone, laminated calcareous mudstone, silty peloidal siliceous mudstone and unlaminated siliceous organic-rich mudstone.[2]

Sequence stratigraphic setting

Published interpretation

Laid down in the Kimmeridgian to early Tithonian during a second-order rise in sea level, the same rise that left organic-rich black shales around the world.[2]

Boundaries and logs

Boundaries

Reported

The younger Bossier lies above it; the Upper Bossier, to the south-west, is sandier than the Lower Bossier that matches the Haynesville. Its shale is interbedded with, or lies basinward of, the Haynesville carbonates.[3, 5, 6]

Dating and diagenesis

Fossils and dating

Reported

Mollusc shells occur, often replaced by pyrite.[2]

Diagenesis

Published interpretation

Framboidal to colloidal pyrite forms concretions, laminae and single framboids, and replaces calcite cement and mollusc shells.[2]

Petroleum significance

  • Source rock
  • Reservoir

Reservoir quality

Reported

Overpressured, with porosity averaging 8 to 12%, water saturation of 20 to 30% and nanodarcy permeability. Wells decline about 80% in their first year, faster than in other shale-gas plays, which is put down to the very high overpressure.[2]

Source rock potential

Reported

Mudstones of the Haynesville and Smackover are sources of oil and gas, both for conventional reservoirs and for the continuous shale gas.[5]

Members and notes

Worth knowing

Published interpretation

The organic-rich mud survived because the basin around the Sabine uplift had restricted circulation: bottom water stayed without oxygen.[2, 5]

Worth knowing

Published interpretation

Carbonate shelves of the Smackover and Haynesville lime surrounded the basin to the north and west, and rivers brought sand and mud from the north-west, north and north-east.[2]

Uncertainties

What is uncertain

Open question

Its exact age is drawn differently: Hammes and colleagues place it in the Kimmeridgian to early Tithonian, while Frébourg and colleagues treat the Haynesville as Upper Kimmeridgian and the Bossier above it as Tithonian.[2, 6]

Fields that drill it

Neighbours in the column

Where it sits in geological time.

Neighbours follow the Atlas column. Members sit inside their parent unit, and some units are missing in parts of a basin.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Haynesville Formation. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/formations/haynesville-formation/.

BibTeX
@misc{geomasteratlas_haynesville_formation,
  author = {{GeoMaster Atlas}},
  title = {Haynesville Formation},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/formations/haynesville-formation/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Haynesville Formation
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/formations/haynesville-formation/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)