Overview
Play record
- Discovered
- 2004
- Discovery well
- Range Resources Renz well, Washington County, Pennsylvania
- Location
- Pennsylvania, where the Marcellus is thickest, with West Virginia, Ohio and New York
AAPG Search and Discovery Article 90154, AAPG Eastern Section Meeting, Cleveland[1]
Undiscovered resources (USGS 2019, mean)
96.5 Tcf gas and 1.5 billion bbl natural gas liquids, technically recoverable; up from 84.2 Tcf in the 2011 assessment[2, 3]
Depth and thickness
50 ft or more thick in the basin interior, from under 2,000 ft to more than 11,000 ft deep[3]
Gas per well (USGS input)
Mean 3.1 bcf in the Northern Interior unit, 2.1 bcf in the Southern and Southwestern Interior units[2]
Entry coverage
10 of 13 topics
Not yet sourced
First production, Seal, Drilling and production hazards. These are added only when a public source supports them. How the Atlas is made
The story
- The Marcellus had long been known as a source rock for the oil and gas produced in the basin over 150 years.[1]
- In 2004 Range Resources completed the Renz well in Washington County, Pennsylvania, with a massive slickwater fracture in the style of the Barnett Shale. The Marcellus began to draw attention worldwide.[1, 4]
- Large companies bought in, mostly through mergers and acquisitions, and leased in north-east Pennsylvania, where there had been little drilling before. When gas prices fell in 2012, operators turned to the western, liquids-rich side of the play.[1]
Geology
Geological setting
Published interpretationA deep, stratified Middle Devonian sea with no oxygen at the bottom. The organic-rich lower Marcellus settled at the toe of a delta that built out from near Harrisburg, beside a carbonate bank on the Findlay-Algonquin arch.[5]
The trap
Published interpretationA continuous accumulation: gas held in its own organic-rich shale across the basin rather than in separate traps.[2, 3]
Reservoir rocks
Reported- Marcellus Formation
Middle Devonian black, organic-rich shale under much of the Appalachian Basin. Long known as a source rock, it has been drilled for shale gas since 2004 and is considered the largest shale-gas resource in the United States.
Source rock
Published interpretationIts own rock: the gas is self-sourced, judging by thermal maturity where it produces.[2]
What a well drills through
The main rock layers above and in the reservoir, top down. Tap a layer for a summary.
- Organic-rich mudstone (source rock)
- Limestone and marl
Drilling
Where wells do best
Published interpretation- The USGS counts only shale more than 1,000 ft deep, at a vitrinite reflectance of at least 0.5%, with at least 25 ft of organic-rich, brittle lithofacies.[2]
- Gas content follows organic carbon and the response to fracturing follows mineral make-up, so mapping lithofacies helps plan horizontal well paths; normalised gas rates from horizontal wells support the lithofacies model.[6]
What to watch for
No field-specific drilling hazards in the sources we checked. We add them as they are published.