Formation · Devonian

Marcellus Formation

Middle Devonian black, organic-rich shale under much of the Appalachian Basin. Long known as a source rock, it has been drilled for shale gas since 2004 and is considered the largest shale-gas resource in the United States.

Last updated · Atlas version 0.29.0

  • Source rock
  • Reservoir

Overview

AgeMiddle Devonian, 393.47 to 382.31 million years ago[1, 2]
RankFormation[2]
Other namesAlso called the Marcellus Shale. Its lower member is called both the Shamokin Member and the Union Springs member.[2, 3]
ThicknessUnder 50 ft (15 m) on the western margin; 50 ft or more in the basin interior; from a few feet to more than 350 ft (105 m) in the fold and thrust belt. Thickest in Pennsylvania.[2, 4]
WhereFrom southern New York to north-east Tennessee and from central Ohio to western Virginia and Maryland, from outcrop to more than 11,000 ft (3,350 m) deep. In the east it is cut off by erosion within the Appalachian fold and thrust belt.[2]

Entry coverage

14 of 20 topics

Not yet sourced

Type or reference section, Mineralogy, Grain size, sorting and sedimentary structures, Fossils and dating, Diagenesis, Seal quality. These are added only when a public source supports them. How the Atlas is made

Rocks and composition

Lithology

Reported

Mainly organic-rich marine shale, with lesser bentonite, limestone and siltstone.[2, 5]

How it was laid down

Depositional environment

Published interpretation
  • Deep, quiet sea. Far from land and below the waves, only fine mud and plankton settle. If the bottom water has little oxygen, organic matter is preserved.[2, 5]

Facies

Published interpretation

Mudstone lithofacies vary with how much land-derived sediment diluted the organic matter, how much was produced and how much survived, which relates to water depth and distance from shore.[6]

Sequence stratigraphic setting

Published interpretation

The Onondaga Formation and the Union Springs member form one third-order sequence: the Onondaga in the lowstand to transgressive systems tracts, the Union Springs in the transgressive, highstand and falling-stage tracts. The black mud accumulated in water at least 330 ft (100 m) deep, with no oxygen at the bottom.[3]

Boundaries and logs

Boundaries

Reported

Lies on the Onondaga Limestone (or the Needmore Shale or Huntersville Chert) and under the Mahantango Formation (or the upper Millboro Shale or middle Hamilton Group). The Geneseo and Burket shales lie close above it.[2, 5]

Log response

Reported

Lithofacies can be predicted from eight petrophysical parameters taken from conventional logs; pulsed neutron spectroscopy logs, which give mineral make-up and organic carbon, confirm the link.[6]

Petroleum significance

  • Source rock
  • Reservoir

Reservoir quality

Reported

Gas content follows organic carbon, and the response to hydraulic fracturing follows mineral make-up. The USGS limits the resource to rock deeper than 1,000 ft, at a vitrinite reflectance of at least 0.5%, with at least 25 ft of organic-rich, brittle lithofacies.[5, 6]

Source rock potential

Reported

Self-sourced: the gas in the shale was generated in the shale, judging by its thermal maturity where it produces.[5]

Members and notes

Union Springs (Shamokin) Member

Reported

The organic-rich lower Marcellus, laid down at the toe and basinward of a delta that built out from near Harrisburg.[3]

Worth knowing

Published interpretation

Recognised for a long time as a source of many of the hydrocarbons produced in the Appalachian Basin over the last 150 years.[4]

Uncertainties

What is uncertain

Open question

What drove the sea-level changes behind its black shales is debated. Kohl and colleagues argue for eustasy, climate or regional uplift and subsidence rather than the movement on basement faults argued by earlier workers.[3]

Fields that drill it

Neighbours in the column

Where it sits in geological time.

Neighbours follow the Atlas column. Members sit inside their parent unit, and some units are missing in parts of a basin.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Marcellus Formation. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/formations/marcellus-formation/.

BibTeX
@misc{geomasteratlas_marcellus_formation,
  author = {{GeoMaster Atlas}},
  title = {Marcellus Formation},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/formations/marcellus-formation/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Marcellus Formation
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/formations/marcellus-formation/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)