Oil, condensate and gas play · Anadarko Basin

Meramec (STACK) play

Mississippian Meramec siltstones above the Woodford Shale in central Oklahoma, the main target of the STACK play since the first Meramec wells were tested in 2013. STACK stands for Sooner Trend, Anadarko Basin, Canadian and Kingfisher counties.

Last updated · Atlas version 0.29.0

The STACK core lies in Canadian, Kingfisher and Blaine counties. Emerging areas are the Shelf (north-east Kingfisher, southern Major and Garfield), the Northwest Extension (Woodward, Dewey, north-west Blaine and southern Major) and the Merge (northern Grady and southern Canadian), which separates STACK from SCOOP.

Overview

Play record

Discovered
2013 (first Meramec wells tested)
Location
Canadian, Kingfisher and Blaine counties, Oklahoma

AAPG Search and Discovery Article 90323, AAPG Annual Convention, Salt Lake City[1]

Thickness

Mississippian section 250 to 1,000 ft; the Woodford below reaches 200 ft[1]

Activity in 2018

SCOOP and STACK had about 90% of the rigs in the Anadarko Basin, second only to the Permian onshore[1]

Through the downturn before 2017

One of the few onshore plays to keep its rig count, at 30 to 50 rigs[2]

Entry coverage

12 of 13 topics

Not yet sourced

First production. These are added only when a public source supports them. How the Atlas is made

The story

  • STACK in the north takes in the Cana Woodford and Meramec plays; SCOOP in the south takes in the Woodford and Springer.[2]
  • The first Meramec wells were tested in 2013, and the Meramec remained the main target in 2018.[1]
  • With the core held by major operators, attention turned to emerging areas, and mergers formed Roan Resources in the Merge and Alta Mesa Resources.[1]

Geology

Geological setting

Published interpretation

Mixed argillaceous and calcareous silt built out as clinoforms over the Osage carbonate shelf, striking north-east and building to the south-east. The nearer facies lay above storm wave base, and the whole was laid down during an overall rise in sea level.[3, 4]

The trap

Published interpretation

Oil and gas from the Woodford were sealed in the Meramec by the Chester Shale above. Its low permeability prevented a conventional oil and gas column: early oil pushed out the formation water and was in turn pushed out by condensate and then dry gas.[5]

Reservoir rocks

Reported
  • Meramec

    Mississippian siltstones of central Oklahoma between the Osage below and the Chester above, the main target of the STACK play. Called the Meramec lime by the USGS.

Source rock

Published interpretation

The Woodford Shale below, judging by biomarkers; the thick Woodford of western Canadian County (Cana) was the main source. The organic matter in the Meramec itself is mainly migrated bitumen.[5]

Seal

Published interpretation

The Chester Shale above.[5]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Limestone and marl
  • Organic-rich mudstone (source rock)
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

Drilling

Where wells do best

Published interpretation
  • Gas-oil ratio contours form arcs around the Cana Woodford depocentre, from which waves of ever lighter fluids moved up and out into the Meramec.[5]
  • STACK is bounded to the north and east where the rock turns carbonate-rich and to the west by depth, dry gas and possible over-maturity.[2]
  • Stratigraphic thickness, net-to-gross, silica and calcite content and porosity from 3-D reservoir models were tested against cumulative oil and gas-oil ratio.[4]

What to watch for

Published interpretation
  • A second charge of more mature fluids moved along some north-south faults and other structures and in places dramatically changed the fluid mix that regional trends predict.[5]
  • The Merge has local faulting and structure.[1]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Cite this page

The Atlas changes as sources are added, so give the version and the date you read it. For the facts themselves, cite the original sources listed below.

GeoMaster Atlas (2026). Meramec (STACK) play. GeoMaster Atlas, version 0.29.0, last updated 21 November 2026. Greenstone Energy Ltd. https://geomaster.uk/atlas/fields/meramec-stack/.

BibTeX
@misc{geomasteratlas_meramec_stack,
  author = {{GeoMaster Atlas}},
  title = {Meramec (STACK) play},
  year = {2026},
  howpublished = {GeoMaster Atlas, version 0.29.0},
  publisher = {Greenstone Energy Ltd},
  url = {https://geomaster.uk/atlas/fields/meramec-stack/},
  note = {Last updated 2026-11-21}
}
RIS
TY  - ELEC
AU  - GeoMaster Atlas
TI  - Meramec (STACK) play
PY  - 2026
DA  - 2026/11/21
PB  - Greenstone Energy Ltd
ET  - 0.29.0
UR  - https://geomaster.uk/atlas/fields/meramec-stack/
ER  - 

Free to reuse under CC BY 4.0, also commercially, with credit to “GeoMaster Atlas, geomaster.uk/atlas”. The GeoMaster name and logo are not licensed. To cite the whole Atlas, use its DOI: 10.5281/zenodo.24419596.

This page as data:MarkdownJSONthe whole Atlas (data.json)