Oil field · Williston Basin

Parshall field

A Bakken field in the eastern Williston Basin with low produced gas-oil ratio and the highest recovery factor of three fields studied, where hot fluids may have helped mature the source.

Eastern Williston Basin, near south-west to north-east structural lineaments.

Field record

Location
Eastern Williston Basin

Unconventional Resources Technology Conference, URTeC 1578764[1]

Maturity

Vitrinite reflectance about 0.85%[1]

Recovery factor

Highest of Antelope, Sanish and Parshall[2]

Best area

Highest well recoveries on the west side[2]

The story

  • Petrography of the Long 1-01H well on the east side of the field shows hydrothermal quartz and carbonate in the Bakken: the middle member carried hot fluids during maturation.[1]
  • Oil inclusions in the upper Bakken shale and the Lodgepole above may date from that hydrothermal event, which likely influenced oil generation.[1]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Limestone and marl
  • Dolomite
  • Salt and evaporites
  • Mudstone and shale
  • Organic-rich mudstone (source rock)
  • Sandstone
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Part of the continuous Bakken oil system. Higher up, the regionally extensive Mississippian F Salt may have acted as a seal, stopping hot fluids from moving further up.[1]

Reservoir rocks

  • Bakken Formation

    A thin Late Devonian to Early Mississippian sandwich: two black, organic-rich shales around a silty dolomite and sandstone middle member. The shales made the oil; horizontal wells in the middle member produce it.

Where wells do best

  • Recovery factor is highest here because the produced gas-oil ratio is lower than at Antelope and Sanish; recovery tracks hydrocarbon pore volume per area.[2]

What to watch for

No field-specific drilling hazards in the sources we checked. We add them as they are published.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence