Oil field · Norwegian Viking Graben and Utsira High

Statfjord field

A giant on the UK-Norway border (85.47% Norwegian) in a large west-tilted fault block. In late life the reservoirs are being depressurised to release gas.

Tampen area, on the median line between the Norwegian and UK sectors.

Field record

Discovered
1974
Discovery well
33/12-1
First production
1979
Water depth
150 m
Operator
Equinor

Norwegian Offshore Directorate FactPages[1]

Recoverable oil

582 million Sm³[2]

Platforms

Statfjord A (1979), B (1982) and C (1985)[2]

Reservoir depth

2,500 to 3,000 m[2]

The story

  • Discovered in 1974. Produced first with water, gas and water-alternating-gas injection; under Statfjord Late Life all injection stopped and depressurisation began in 2007 to free the gas dissolved in the remaining oil.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Mudstone and shale
  • Limestone and marl
  • Sandstone
  • Coal
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

A large fault block tilted to the west, plus several smaller blocks on the eastern flank.[2]

Reservoir rocks

  • Brent Group

    The Middle Jurassic delta sands that made the northern North Sea: the reservoir of Brent, Ninian, Thistle, Dunlin and Alwyn North.

  • Statfjord Formation

    Latest Triassic to Early Jurassic sandstones laid down by rivers and fan deltas. The deeper of the two reservoirs at Brent and Alwyn North.

  • Cook Formation

    Early Jurassic marine sand inside the Dunlin mudstones. A reservoir at Statfjord, Gullfaks and the Oseberg satellites, but with low permeability at Gullfaks.

Where wells do best

  • The Brent and Statfjord groups have excellent reservoir quality.[2]

What to watch for

No field-specific drilling hazards in the sources we checked. We add them as they are published.

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1Fields: discovery wellbore, operator and status. Norwegian Offshore Directorate FactPages (open data).
  2. 2Statfjord: field description (development, reservoir, recovery strategy, status) and recoverable reserves at 31 December 2025. Norwegian Offshore Directorate FactPages.
  3. 3FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.