Oil field · Norwegian Central Graben

Valhall field

Chalk on the Lindesnes Ridge that has produced more than one billion barrels of oil equivalent, three times the original estimate.

Block 2/8, southern Norwegian North Sea.

Field record

Discovered
1975
Discovery well
2/8-6
First production
1982
Water depth
70 m
Operator
Aker BP

Norwegian Offshore Directorate FactPages[1]

Produced to date

More than 1 billion barrels of oil equivalent[2]

Reservoir depth

About 2,400 m[2]

Recoverable oil

156 million Sm³[2]

The story

  • Discovered in 1975 and producing from 1982 by pressure depletion and compaction drive. Water injection in the centre of the field began in 2004; a new platform powered from shore replaced the ageing facilities.[2]

What a well drills through

The main rock layers above and in the reservoir, top down. Tap a layer for a summary.

  • Chalk
  • Limestone and marl
  • Mudstone and shale
  • Organic-rich mudstone (source rock)
Layers shown in order, not to scale. The reservoir is highlighted. Rock patterns follow the USGS FGDC lithology standard.

The trap

Upper Cretaceous chalk of the Hod and Tor formations on the Lindesnes Ridge, where the Ekofisk Formation is thin or missing at the crest.[2, 3]

Reservoir rocks

  • Tor Formation

    Clean, soft, fractured chalk from the last age of the Cretaceous: the main reservoir of Ekofisk, Valhall, Eldfisk, Hod and Tor.

  • Hod Formation

    Older Late Cretaceous chalk under the Tor Formation. A reservoir at Valhall, Hod and Eldfisk, but with poorer flow than the Tor above.

Where wells do best

  • The fine-grained Tor chalk has good reservoir quality, and its fractures let oil flow much more easily than in the Hod below.[2]

What to watch for

  • Chalk failure in wells: early failures from natural damage, drilling and perforating; later failures as reservoir pressure falls. Shut-ins, restarts and producing below bubble point trigger it.[4]
  • Compaction from depletion and water weakening has caused seabed subsidence.[2]

GeoEngine Field Intelligence

This page, inside your geosteering project

Field Intelligence in GeoEngine writes a cited report on the field your well is in: the formations, how they read on logs, where wells do best and what can go wrong. Next, those reports will start from the Atlas entry for your field.

See Field Intelligence

Sources

Written in our own words from these sources. Checked 17 November 2026.

  1. 1Fields: discovery wellbore, operator and status. Norwegian Offshore Directorate FactPages (open data).
  2. 2Valhall: field description (development, reservoir, recovery strategy, status) and recoverable reserves at 31 December 2025. Norwegian Offshore Directorate FactPages.
  3. 3Ekofisk Formation, NW European Stratigraphic Lexica (after Gradstein and Waters 2016, Newsletters on Stratigraphy 49). Norwegian Offshore Directorate and the Timescale Foundation.
  4. 4Hermansson and Gudmundsson (1990), Influence of production on chalk failure in the Valhall Field. SPE 20952, European Petroleum Conference.
  5. 5FGDC Digital Cartographic Standard for Geologic Map Symbolization (FGDC-STD-013-2006), section 37: lithologic patterns. U.S. Geological Survey Techniques and Methods 11-A2.