Overview
Field record
- Discovered
- 1970
- Discovery well
- Amoco Production Company and Vessels Oil and Gas, completed in the Muddy (J) Sandstone
- Location
- North of Denver, Colorado, across the axis of the Denver Basin
- Wells
- More than 35,000
AAPG Search and Discovery Article 90357, AAPG Rocky Mountain Section Meeting, Cheyenne[1]
Produced to 2019
812 million bbl oil and 7.5 Tcf gas from more than 35,000 wells[1]
Producing depths
About 4,000 to 8,500 ft[1]
Muddy (J) Sandstone gas
Original reserves estimated at 1.1 Tcf; the USGS later put estimated ultimate recovery at 1.27 Tcf from 1,680 wells[1, 2]
Muddy (J) Sandstone reservoir
Net pay 10 to 50 ft, porosity 8 to 12%, permeability 0.005 to 0.05 md, at 7,600 to 8,400 ft[3]
Entry coverage
12 of 13 topics
Not yet sourced
First production. These are added only when a public source supports them. How the Atlas is made
The story
- Amoco Production Company and Vessels Oil and Gas found the field in 1970 with completions in the Muddy (J) Sandstone.[1]
- Drilling for J gas found more pay above it. The Terry and Hygiene sandstones of the Pierre Shale first produced in 1972, the Codell in 1981, the Niobrara in 1985 and the Plainview in 1998.[1, 3]
- In early development the Codell was overlooked and bypassed: it is hard to pick on logs and has low permeability. In 1981 and 1982 more than 100 Codell discoveries were made in and around the field.[3]
- In 1998 the Colorado Oil and Gas Conservation Commission allowed up to 10 wells per 320 acres in any Cretaceous reservoir, so existing wells could be deepened or recompleted in other zones.[2]
- Horizontal Niobrara drilling began in 2009, and horizontal Codell wells followed from 2011.[4, 5]
Geology
Geological setting
Published interpretationThe main J reservoir, the Fort Collins Member, is read as delta-front, shoreline and marine-bar sand laid down as the shoreline of the Skull Creek sea retreated quickly. Around the field, river valleys cut into it were filled with the channel sands of the Horsetooth Member.[3]
The trap
Published interpretationA basin-centre accumulation: no water comes from the J or the Codell even in the structural lows. The traps are mainly stratigraphic and diagenetic, held by subtle changes in permeability, and the USGS assesses the J gas as a continuous, basin-centred accumulation.[1, 3, 6]
Reservoir rocks
Reported- Muddy (J) Sandstone
Early Cretaceous shoreline, delta and valley-fill sandstone, the main producing reservoir of the Denver Basin. Its tight delta-front sand holds the Wattenberg gas.
- Codell Sandstone
A thin, tight, grey, very fine-grained and burrowed marine sandstone at the top of the Carlile Shale, just below the Niobrara. A major oil and gas pay in Wattenberg and the northern DJ Basin.
- Niobrara Formation
Late Cretaceous chalks and marls laid down in the Western Interior Seaway. It sources its own oil and gas and is drilled with horizontal wells in the Denver-Julesburg Basin, where its chalk benches are called A, B and C above the Fort Hays.
Source rock
ReportedSonnenberg lists the Skull Creek, Graneros, Greenhorn, Carlile and Niobrara and the Sharon Springs Member of the Pierre Shale. The USGS names the Mowry and Graneros shales as the main source of J and D oil and gas.[1, 2]
Seal
Published interpretationThe Mowry, Huntsman and Graneros shales over the J and D sandstones. On the north and east flanks the updip seal is thought to come from diagenesis.[2, 3]
What a well drills through
The main rock layers above and in the reservoir, top down. Tap a layer for a summary.
- Chalk
- Organic-rich mudstone (source rock)
- Sandstone
- Mudstone and shale
Drilling
Where wells do best
Published interpretation- Wattenberg is a hot spot. Temperature gradients rise from 16 to 18 °F per 1,000 ft at the edges of the field to 28 to 29 °F per 1,000 ft in the high gas-oil-ratio areas, where the Colorado Mineral Belt crosses the basin.[1]
- For vertical Niobrara and Codell wells, a high gas area centred on T. 4 N., R. 65 W. is ringed by an oil-rich rim. Suggested causes are more open fractures near the Longmont wrench fault zone, cleaner sand with less clay, and thicker Codell.[2]
What to watch for
Published interpretation- Large faults cutting both the Niobrara and the Codell form flower structures tied to basement strike-slip faults. Horizontal wells that cross them are more likely to drift out of zone.[7]
Open questions
Where sources disagree
Open question- First Niobrara production. Sonnenberg (2019) gives 1985, and the Atlas uses it; Sonnenberg (2013) gives 1975, from vertical completions.[1, 4]
The Atlas shows each view with its source. How the Atlas is made