Geosteering guide

Geosteering in geothermal wells

Geothermal drilling is borrowing the horizontal well from oil and gas, and with it the geosteerer. Here is where horizontal geothermal wells are drilled, what changes when the rock is hot and hard, and the projects worth knowing.

Updated 17 November 2026 · GeoMaster technical team

Why geothermal wells go horizontal

A geothermal well produces heat in proportion to how much hot rock the water touches. A vertical well crosses a reservoir for a few hundred metres at most. A horizontal well can stay in it for a kilometre or more, so one well pair can do the work of several vertical wells. That is the same argument that made horizontal drilling standard in shale, and it is why the methods of geosteering are now moving into geothermal.

Three kinds of geothermal well

  • Enhanced geothermal systems (EGS): two wells drilled into hot, low-permeability rock, often granite, then connected by hydraulic fractures. Water is pumped down one and produced hot from the other. The laterals are drilled side by side at a planned spacing.
  • Closed-loop systems: water circulates through sealed wellbores and never touches the rock. Laterals from two wells are joined underground, so steering two bores to meet each other is the core task.
  • Sedimentary (hydrothermal) systems: hot water is produced from a permeable aquifer, such as the sandstones used for heat in the Netherlands. A horizontal well here is steered to stay in the best reservoir, much like an oil well.

What changes for the geosteerer

TopicOil and gas (shale)Geothermal (EGS and closed loop)
What you steer forStaying in a target layer a few metres thickPlanned geometry, spacing to the other well, fracture targets
CorrelationGamma ray against a type wellLittle layering in granite; more weight on surveys and structure
Position controlSurveys plus the logSurveys, survey error and, for closed loops, magnetic ranging between wells
TemperatureUsually within tool ratingsOften above 175 °C, at or past what many tools are rated for
RockSedimentary, drills fastCrystalline or hard carbonates, slow and abrasive

In sedimentary geothermal the job looks familiar: correlate the lateral against an offset well, read dip, and keep the well in the sandstone with the best permeability. The steering loop and landing the curve work the same way.

Heat and the tools

Measurement-while-drilling and logging-while-drilling electronics have long been rated to about 175 °C. Some vendors now offer strings rated to around 200 to 210 °C, and higher ratings are in development. Many EGS wells are hotter than that at the toe, so drillers cool the well by circulating, accept a shorter tool life, or run fewer sensors. For the geosteerer, that can mean fewer logs, gaps in the data, and more reliance on surveys and the plan.

Survey quality matters even more when the target is another wellbore. At Eavor's Geretsried project in Germany, the high latitude and strong local magnetic field produced large survey error ellipses, and magnetic ranging between the wells was needed to bring laterals together.

Projects to know

  • Fervo Energy, Project Red (Nevada, 2023): a horizontal EGS well pair with laterals of about 3,250 ft (about 990 m), reaching about 191 °C. The 30-day test flowed 63 litres per second, enough for about 3.5 MW of electricity, as reported by the company.
  • Utah FORGE (Utah, US Department of Energy): well 16A(78)-32 was deviated to 65° below about 6,000 ft and reached 10,987 ft measured depth and 8,559 ft true vertical depth, with preliminary toe temperatures above 228 °C.
  • Eavor-Loop, Geretsried (Germany): two vertical wells to about 4,235 m, each with six laterals of around 3,500 m, joined toe to toe in pairs with active magnetic ranging. Drilling ran from July 2023 to October 2025.
  • Dutch geothermal doublets: wells into porous aquifers at roughly 40 to 100 °C for heating, mostly in sandstones whose bodies vary in thickness and connection, the kind of reservoir where steering a horizontal section pays.

Moving from oil and gas

Well planning, surveys, dogleg, landing, working with directional drillers and remote operations all carry over directly. What to add:

  • Survey error and ranging: how error ellipses grow with depth, and how magnetic ranging places one well relative to another.
  • Crystalline geology: fractures, faults and stress in granite rather than layer-cake stratigraphy.
  • Temperature planning: which tools survive, for how long, and what data you will not get.
  • Fracture design: in EGS, well spacing and orientation are set by how the fractures will grow.

For the role itself, see the geosteering geologist and remote geosteering jobs. Terms used here are in the geosteering glossary, and you can check well paths with the free survey calculator.

Frequently asked questions

Is geosteering used in geothermal wells?+

Yes, more and more. Enhanced geothermal systems now drill horizontal well pairs, closed-loop systems join laterals deep underground, and some sedimentary geothermal wells are steered through aquifer sandstones. The tools and methods come from oil and gas, adapted to hotter, harder rock.

How is geothermal geosteering different from oil and gas?+

In hot granite there are few layers to correlate, so steering follows the planned geometry, the spacing to the other well and the fracture targets rather than a gamma ray marker. In sedimentary geothermal, steering looks much like oil and gas: staying in the best sandstone. Heat is the big difference in both: it limits which measurement tools can run.

What temperature can MWD and LWD tools handle?+

Most commercial tools have been rated to about 175 °C. Some vendors offer tools rated to around 200 to 210 °C, and higher ratings are still in development. Many enhanced geothermal wells are hotter than 175 °C at the toe, which is why cooling the well while drilling matters.

Can oil and gas geosteerers work in geothermal?+

Yes. Well planning, surveys, log interpretation, landing and working with directional drillers carry straight over. What is new is the rock (often crystalline), the heat, and steering for well spacing and fractures instead of a thin pay zone.

Sources

Steer your next well in the browser

GeoMaster® puts log correlation, the geological model and plan tracking in one browser tab. Start on the free plan, or ask for a 14-day Pro trial: we approve requests within 1 working day.